Basic Info.
Cab Location
Not Adjustable
Fork Size
1070mm*122mm*40mm
Max Lifting Height
3000mm
Spec.
2460mm*1150mm*2120mm
Transport Package
Nude Package
Specification
2885*1480*2300
Product Description
XCMA Mini Forklift 1.5 - 2.5t LPG/Gasoline Forklift
The specification of 2t LPG/Gasoline Forklift
Manufacturer | | | XCMA |
Model | | Power shift T/M | FG20T |
Manual shift T/M | FG20C |
Load capacity | | kg | 2000 |
Load center | | mm | 500 |
Power unit | | | Gasoline/LPG |
Operator type | | | Driver/seat |
Tire type | Front/rear | | Pneumatic |
Wheel | Front/rear | | 2/2 |
Max. lifting height | | mm | 3000 |
Free lift | | mm | 160 |
Fork size | L*W*T | mm | 1070*122*40 |
Tilt range | Mast forward/backward | deg | 6/12 |
Overall length(without fork) | | mm | 2460 |
Total width | | mm | 1150 |
Mast height (fork lowering) | | mm | 1995 |
Overall height fork raised | With backrest | mm | 4030 |
Height to head guard | | mm | 2120 |
Turning radius(outside) | | mm | 2170 |
Front face of fork to front axle | | mm | 450 |
Min. right angle stacking aisle | without load length&clearance | mm | 2615 |
Speed | Max Travelling full/no load | km/h | 17/19 |
Lifting full/no load | mm/s | 550/580 |
Lowering full/no load | mm/s | 450/550 |
Max.drawbar pull | Power shift T/M full/no load | kg | 1650/830 |
Manual shift T/M full/no load | kg | 1700/830 |
Gradeability at 1.6km/h | Power shift T/M full/no load | % | 25/20 |
Manual shift T/M full/no load | % | 25/20 |
Truck weight | | kg | 3240 |
Weight distribution | Full load front/rear | kg | 4660/580 |
No load front/rear | kg | 1470/1770 |
Tires | Number | front/rear | 2/2 |
Model | front axle | 7.00-12-12PR |
rear axle | 6.00-9-10PR |
Wheelbase | | mm | 1600 |
Tread | Front/rear | mm | 970/970 |
Ground clearance | At lowest point(mast) | mm | 110 |
Frame | mm | 115 |
Brake | Service brake | | Hydraulic-foot pedal |
Parking brake | | Mechanical-hand lever |
Battery | Voltage/capacity | V/AH | 12/60 |
Engine | Model | | Nissan K21 |
Rated power | PS(kw/rpm) | 47/2250(34.6/2250) |
Rated torque | kg-m max.(N.m) | 15.7/1600(153/1600) |
Number of cylinders | | 4 |
Placement | L | 2.065 |
Fuel tank capacity | L | 70 |
Transmission | Speed forward/backward | Power shift T/M Manual shift T/M | 1-1 power shift T/M 2-2 manual shiftT/M |
Operating pressure | Hydraulic system pressure | kg/cm² | 180 |
Product Features
1.Safe:
LED work lights and warning lights make it safer and more efficient evenin poor lighting conditions.
New designed overhead guard protective device prevent the sudden accidents.
Thicker reinforcing plate ensure the safety and efficiency.
2.Easy to operate:
Linde-Technology single chain with reinforced load backrest--makes an excellent and wider field of visionfor operator.
3.Beautiful and comfortable:
New suspension adjustable seat makes the long time operating more comfortable.
Step area is 1.5 times larger with lower step height than fellow forklifts.
4.Durable:
Sunken tilt cylinder under the floor build broader flat floor and less abrasion.
Change plastic slider to alloy copper slider, reduce the abrasion and narrow the gap between masts.
Thicker steering axle bridge deck.
5.Environmental:
Middle muffler, more environmental.
6.High technology:
Maintenance free radiators adopt Germany technology.
Standard:
· ZAPI Controller, AC System;
· Hoppeake battery
· Duplex 3M MAST (2-stages mast);
· Pneumatic tyre;
· Working lights, buzzer, reverse alarm light, mirrors, seat belt, and the other standard equipments;
Technology:
· AC-front dual drive motors
· Full AC system;
· Power matched with controller;
· Excellent waterproof and dustproof performance;
· Regenerative braking system;
· Emergent circuit breaker;
· Low noise pump;
Service:
· Center of rotation between the driving wheels: Performs the smallest turn radius possible;
· Dual front drive motors: Great traction even on wet or uneven surfaces;
· Tire protection: Both wheels are driven in the opposite direction;
· Driving sensor: The position of the steering wheel is continuously transmitted to the control system;
After sales service
XC always treat after-sale service as important as sale.Nowadays more than 50 agents around the world can supply XC professional After-sale service.All the product of XC supplied with 1 year or 2000 working hours (which occurs first) Period quality warranty.Detail clauses and policies, please check our website and product certificate.
Address:
Lilin Industry Zone Guankou Rd, Jimei District, Xiamen, Fujian, China
Business Type:
Manufacturer/Factory, Trading Company
Business Range:
Construction & Decoration, Industrial Equipment & Components, Manufacturing & Processing Machinery, Service
Management System Certification:
ISO 9001, ISO 14001, ISO 20000
Company Introduction:
Xiamen Qing You Chuan Engineering Machinery Co., Ltd. Which is also named as "XiaChuan machinery". Our company was established on 2010, it is located at Guankou machinery industry zone, Xiamen city, China.
Xiachuan is a professional equipment company specializing in manufacturing ZL Wheel Loaders, Forklift Loaders, Log Grapple Loaders, Excavator and their parts. Our main products contain ZL series Wheel Loaders from 1.5tons to 8tons, Forklift Loaders from 2tons to 40tons, Log Grapple Loader from 5tons to 23tons, Wheel Excavator from 6tons to 9tons, Heavy Forklift and Rough Terrain Forklift.